MEDICUBE AGE-R Booster Pro (1 pc)

Enjoy professional-level skincare in the comfort of your own home with MEDICUBE’s AGE-R Booster Pro, a 6-in-1 total-care device that uses the latest skincare technology to help you achieve your skin goals. With four easy-to-use modes, it uses electroporation, microcurrents, EMS, electric needles, LED, and sonic vibrations to improve skincare absorption, boost radiance, firmness, and elasticity, and minimise the appearance of pores. 

You can use the device in one of four ways after applying your favourite serum and moisturiser (no need for a conductive gel!):

Booster mode (Electroporation): The Booster mode uses Electroporation to create temporary passageways into the skin and allow active skincare ingredients to penetrate deeper for maximum, glow-boosting effectiveness. Studies show this mode to increase skin permeability.

MC mode (Microcurrents): The MC mode helps to volumise and plump up the skin, softening the appearance of fine lines and wrinkles around the eyes and mouth. Studies show this mode improves forehead volume and helps soften the appearance of wrinkles.

Derma Shot mode (EMS): The Derma Shot mode helps to firm and define skin by stimulating the facial muscles with mid-frequency EMS.

Air Shot mode (Electric needles): The Air Shot mode helps to improve pore elasticity by creating non-damaging passageways into the skin with electric needles. 

Choose the mode that best caters to your specific skincare concerns. 

This device also uses 5 types of LED to achieve different skin goals.

Blue LED has a wavelength range of 455-492nm and helps with pore care and sebum control.

Orange LED has a wavelength range of 597-622nm and helps to brighten skin and boost radiance.

Green LED has a wavelength range of 492-577nm and helps to increase skin volume.

Red LED has a wavelength range of 622-780nm and helps to encourage greater skin elasticity. 

Purple LED has a wavelength range of 390-455nm and helps to improve the absorption of active skincare ingredients.

Note: These LED colours are preset according to the mode in which you are using the device. 

This device is equipped with a skin contact sensor that emits LED light only when it touches the skin. It is suitable for all skin types. 

*The above information is based on information shared by the brand. 

*This device uses electrical microcurrents, so it is important to use it with caution. Please read the usage instructions and warnings below before you start using this product.

What's included

• AGE-R Booster Pro
• User Manual
• USB Charging Cable

*Items are subject to change at the manufacturer's discretion. 

How To Use

To turn on the device, press and hold the button for more than two seconds. Shortly press the mode button to change between modes. To change the strength level, briefly press the power button. Start at level 1 and increase the strength as your skin gets used to it.

Avoid using the device on the Adam's Apple, wounds, and areas that have recently been subject to surgical procedures.

For Air Shot Mode:

Use on clean, dry skin 2-3 times a week.

1. Ensure the head of the device is fully in contact with the skin surface. Move the device in sweeping motions, moving from the inside of the face outwards. Use for 5 minutes at a time. 

For Booster Mode:

Use on clean skin 1-2 times a day.

1. After cleansing, follow your regular skincare routine by applying serums and moisturisers evenly across your face.

2. Ensure the head of the device is in contact with the skin surface. Roll the device over skin in a circular motion, moving from the inside of the face outwards. Use for 5-10 minutes at a time.

For MC Mode:

Use on clean skin 1-2 times a day.

1. After cleansing, follow your regular skincare routine by applying serums and moisturisers evenly across your face.

2. Ensure the head of the device is fully in contact with the skin surface. Roll the device over skin using upward motions, moving from the inside of the face outwards. Use for 5-10 minutes at a time.

For Derma Shot Mode: 

Use on clean skin 1-2 times a day.

1. After cleansing, follow your regular skincare routine by applying serums and moisturisers evenly across your face.

2. Ensure the head of the device is fully in contact with the skin surface. Slowly draw circles or massage your face with the device, moving from the inside of the face outwards. Pause for 1-2 seconds on areas you particularly wish to target. Use for 5-10 minutes at a time.

Download the Medicube AGE-R Booster Pro instructions 

FAQs

How often should I use the product?

It is recommended to use the device on Booster mode, MC mode, and Derma Shot mode 1-2 times a day. It is recommended to use the device on Air Shot mode 2-3 times a week.

Can I use all four modes in the same routine?

Yes, you can! Use the Air Shot mode first on clean, dry skin, then use the other modes after you have applied skincare products that contain active ingredients.  

Do I need a recovery period after use?

The device does not cause direct scars on your face, so there is no separate recovery period. 

How can I clean the device after use?

After use, wipe down the head with a wet wipe or cosmetic cotton pads. Store the item in a dry area.

How do I charge the device?

Charge the device using the included USB-C charger before using it for the first time and whenever the battery is low. The battery level will be shown on the LED Indicator in white during charging. The device cannot be used while it is charging.